ADR ATEX EQUIPEMENT (LEVEL 1) Tank approval for the carriage of hazardous wastes of classes 3, 4-1, 5-1, 8-2, 8 and 9
Tank classification code L4AH + S4AH (ADR 2007 chapter 6-10)
In conformity with tha ATEX directive 94/9
Possibility in the class 3 : Hazardous wastes with flash point below 60°C :
Carriage of hazardous wastes which must be loaded by means of a suitable transfert pump of by gravity (The truck engine must be stopped) Discharge must be done by gravity with closed rear door (The truck engine must be stopped) Hazardous wastes with flash point above 60°C : They can be loaded by vacuum, transported and discharged by pressurizing the tank (with open or closed rear door). The list of permissible products in each class will be given according to the equipement configuration and the tank material.

- Two compartments tank
- Fixed or air actuated moving partition inside the tank
- Hydraulic locking of the tank rear door
- Hydraulic dumping of the tank
- ADR locking système of the tank dumping, during the transport
- Emptying ball valve ø 115 mm, ball valve ø 115 mm

- Vacuum pump with vanes SACAVI HU 1000 with flamme arrestor
  Generated theoretical volume : 1330 m³/h
- Liquid ring vacuum pump ALPHA 20
  Generated theoretical volume : 1600 m³/h
Another pump can be mounted : consult us

- URACA KD 715 GP 55, flow : 240 l/mn, pressure : 150 b
- URACA KD 716 GP 60, flow : 315 l/mn, pressure : 150 b
- WOMA 1503 P 55, flow : 325 l/mn, pressure : 150 b
- WOMA 1503 P 50, flow : 267 l/mn, pressure : 180 b
- URACA P3-45 Plungers 55, flow : 292 l/mn, pressure : 175b
- URACA P3-45 plungers 55, flow : 292 l/mn, pressure : 230b
Another pump can be mounted : consult us

- Steel hose reel for 1" or ¾" hose
- Manual hose reel for 60 to 80 m ½" hose

- 2 stainless steel hose boxes
- Polyester tool box
- Bracket for brush and shovel
- Stainless steel ladder with bracket
- Stainless steel road cone bracket
- Stainless steel bracket for road triangles

- 1 Flashing light at the rear
- Retro-reflecting stripes class I
- Numberplate’s supports fitted on each side and at the rear.

- Fixed stainless steel rear control panel, aluminium control box on the side and on the reel

- Rear view camera system
- Overload indicator for vehicles with air suspension
- Centralized greasing
- Decantation system
- Telescopic arm and hose guide
- Motorized assistance for extension arm
- Tip over AK5 panel
- Stainless steel stone box